| Spot Clean - Step 1 using Citrus Oil Degreaser, Stripper or Rust Remover |
 Tire Marks |  Tar, Gum and Paint |
| Concrete Cleaning and Surface Prep - Step 2 |
Spray grass, weeds and moss with a herbicide two weeks prior to cleaning. Before sanding and cleaning remove all plants from between pavers. | 
Remove stains using STONESAVER Citrus Oil Remover, Rust Remover or Stripper, depending on the nature of the stain. |
Sanding should be done prior to Concrete Cleaner and Surface Preparation. Only washed and dried silica may be used after cleaning and before sealing | 
Pace off area to be cleaned and wet down surface. |
Spray Concrete Cleaner and Surface Prep on to dampened paced off area. | 
Scrub the Concrete Cleaner and Surface Prep area, do not allow to dry. |
Rinse the Concrete Cleaner and Surface Prep thoroughly from the surface and pace off the next section to be cleaned. Over lap the area by 1 foot to ensure even cleaning. | 
Roll on sealer, moving in one direction. If a second coat in necessary roll in the opposite direction. |
| Sealer, Repellent or Protector - Step 3 |
 Penetrating Low Gloss Sealer is suitable for porous natural stone and all concrete. |  Sealing Exposed Aggregate with Paving Stone Sealer. |
 Natural stone chimneys can be sealed with Paving Stone, Concrete or Penetrating Low Gloss Sealer, however extreme caution should be used when sealing indoors. It should only be done by professionals with proper mechanical ventalation. |  Exposed aggragate and patterned concrete combination. The Exposed aggragate was sealed with paving stone sealer and the patterned concrete with Penetrating Low Gloss Sealer. |
 Unsealed natural limestone. | 
Natural limestone after Penetrating Low Gloss Sealer is applied. |
| Before and After |
Before and After on Brown Pavers | 
Before and After on Grey Pavers |
Before Cleaning | 
After Clean and Seal |
Cleaning performed on upper half of walkway | 
Walkway cleaned and sealed |
Exteme case of Efflorescence | 
Cleaned and Sealed |
Before Cleaning and Sealed | 
After Cleaning and Sealed |
After Cleaning and Sealed | 
After Cleaning and Sealed |
| Falls View Casino |
STONESAVER at the Falls View Casino in Niagara Falls, Ontario | 
Water Jet Blasting |
Prior to Concrete Clean and Surface Prep a variety of stains to be removed. | 
After Sealing with Black tinted Sealer |
After Sealing with Black tinted Sealer | 
After Sealing with Black tinted Sealer |
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Registered trademark and graphic design are property of Surface Renewers (Ontario) Inc.